Products

HONEYWELL XLS3000-CPUD Intelligent Addressable Fire Alarm System XLS3000 with display, Includes CPU

General

The Honeywell XLS3000 is an intelligent Fire Alarm Control Panel (FACP) designed for medium- to large-scale facilities. 

Fire emergency detection and evacuation are extremely critical to life safety, and the XLS3000 is ideally suited for these applications.

The XLS3000 is part of the XLS Series of products from Honeywell. The XLS3000 is ideal for virtually any application because

it features a modular design that is configured per project requirements. With one to ten Signaling Line Circuits (SLCs),

the XLS3000 supports up to 3,180 intelligent addressable devices.

Information is critical to fire evacuation personnel, and the XLS3000’s large 640-character Liquid Crystal Display (LCD)

presents vital information to operators concerning a fire situation, fire progression, and evacuation details.

Product Line Information

CONFIGURATION GUIDELINES

Stand-alone and network systems require a main display. On single-FACP systems (one XLS3000), the display option is the

XLS3000-CPUD. On network systems (two or more networked fire panel nodes), at least one XLS-NCA2 is required. 

Options listed as follows.

MAIN SYSTEM COMPONENTS

XLS3000-CPUD: XLS3000 with display. Includes CPU, 640 character display with keypad. 

Non-English versions are available: XLS3000-CPUD-FR (French), XLS3000-CPUD-PO (Portuguese), XLS3000-CPUD-RU (Russian), 

XLS3000-CPUD-SC (Standard Chinese), XLS3000-CPUD-SP (Spanish).

XLS3000-CPUND: XLS3000 without display. Includes CPU only.

AMPS-24: Main power supply and battery charger for the XLS3000. One required for each XLS3000 CPU used in 110/

120 VAC applications. Charges 25 to 200 AH batteries. Primary input power: 110/120 VAC, 50/60 Hz, 4.5 A (maximum). 

Mounts in the bottom left hand section (battery row) of a XLS-CAB-4 enclosure. See 85-3057.

AMPS-24E: Main power supply and battery charger for the XLS3000. One required for each XLS3000 CPU used in 240

VAC applications. Charges 25 to 200 AH batteries. Primary input power: 240 VAC, 50/60 Hz, 2.25 A. Mounts in the bottom

left hand section (battery row) of a XLS-CAB-4 enclosure. See 85-3057.

XLS-ELCM-320: Loop Control Module, Eclipse Protocol. Provides one Eclipse SLC. 

XLS3000 supports up to five XLSELCM-320 and five XLS-ELEM-320 expanders for a total of ten SLCs. See 85-3056.

XLS-ELEM-320: Loop Expander Module, Eclipse Protocol.

Expands an XLS-ELCM-320. Cannot be used to expand an LCM-320. See 85-3056.

LCM-320: Loop Control Module, CLIP/FlashScan Protocol. Provides one CLIP/FlashScan SLC. XLS3000 supports up to five

LCM-320s and five LEM-320 expanders for a total of ten SLCs. See 85-3056.

LEM-320: Loop Expander Module, CLIP/FlashScan Protocol.

Expands an LCM-320. Cannot be used to expand an XLSELCM-320. See 85-3056. NETWORKING OPTIONS

XLS-NCA2: Network Control Annunciator. One required per

XLS-NET. Provides annunciation and control of all points on

XLS-NET. Non-English versions are available: XLS-NCA-2-FR

(French), XLS-NCA-2-PO (Portuguese), XLS-NCA-2-RU (Russian), XLS-NCA-2-SC (Standard Chinese), XLS-NCA-2-SP

(Spanish). See 74-4045.

NCM-W, NCM-F: Network Communications Modules. Wire and

multi-mode fiber versions available. One required for each network node (XLS3000, XLS140, XLS140-2, XLS-DVC-EM, BACNET GATEWAY, Q7055B1039) on XLS-NET. 

Mounts in a standard chassis position or on a BMP-1 plate. See 85-3007.

XLS-NCM-EBI-W: Network Communication Module, Wire. Used in applications where the Q7055B1039 (Fire Network adapter) is mounted remotely 

next to an EBI server. The XLS-NCM-EBI-W mounts inside the EBI server (in an PCI slot) and communicates

with the Q7055B1039. See 85-3007. XLS-NCM-EBI-F: Network Communication Module, Multi-Mode

Fiber. Used in applications where the Q7055B1039 (Fire Network adapter) is mounted remotely next to an EBI server. 

The XLS-NCM-EBI-F mounts inside the EBI server (in an PCI slot) and communicates with the Q7055B1039. See 85-3007

There have More items , all for 100% New & Original with very good discount , pls kindly contact with Chris directly to know more details information . 

Chris Fang 

Sales Engineer

Sunup (Wuhan) Import and Export Co., Ltd.

Add:7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan, China

Postal code:430015

M: + 86-15926376631(WhatsApp & Wechat) 

Skype: live:chris_61491

Email: chris@sunupauto.com

Web: https://www.sunup-automation.com