Products

SIEMENS 6EP1334-3BA01 update and replacement of 6EP1334-2BA01 power supply

SITOP PSU200M 24 V/10 A SITOP PSU200M 10 A Stabilized power supply input: 120/230-500 V AC output: DC 24 V/10 A

Input

Input 1-phase and 2-phase AC

● Note Set by means of selector switch on the device

Supply voltage

● 1 at AC 120 ... 230 V

● 2 at AC 230 ... 500 V

Input voltage

● 1 at AC 85 ... 264 V

● 2 at AC 176 ... 550 V

Wide-range input Yes

Overvoltage resistance 1300 Vpeak, 1.3 ms

Mains buffering at Vin = 120/230 V, typ. 150 ms at Vin = 400 V

Mains buffering at Iout rated, min. 25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V

Rated line frequency 1 50 Hz

Rated line frequency 2 60 Hz

Rated line range 47 ... 63 Hz

Input current

● at rated input voltage 120 V 4.4 A

● at rated input voltage 230 V 2.4 A

● at rated input voltage 500 V 1.1 A

Switch-on current limiting (+25 °C), max. 35 A

I²t, max. 4 A²·s

Built-in incoming fuse T 6.3 A (not accessible)

Protection in the mains power input (IEC 898) Recommended miniature circuit breaker at 1-phase operation:

from 6 A (10 A) characteristic C (B); required at 2-phase

operation: circuit breaker 2-pole connected or circuit breaker

3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at

230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL

489) at 400/500 V

Output

Output Controlled, isolated DC voltage

Rated voltage Vout DC 24 V

Total tolerance, static ± 3 %

Static mains compensation, approx. 0.1 %

Static load balancing, approx. 0.1 %

Residual ripple peak-peak, max. 50 mV

Spikes peak-peak, max. (bandwidth: 20 MHz) 200 mV

Adjustment range 24 ... 28.8 V

Product function Output voltage adjustable Yes

Output voltage setting via potentiometer

Status display Green LED for 24 V OK

Signaling Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"

On/off behavior Overshoot of Vout approx. 3 %

Startup delay, max. 1 s

Voltage rise, typ. 50 ms

Rated current value Iout rated 10 A

Current range 0 ... 10 A

● Note +60 ... +70 °C: Derating 2%/K (at 120 V, 230 V) or 3.5%/K (at 400

V)

Supplied active power typical 240 W

Short-term overload current

● at short-circuit during operation typical 30 A

Duration of overloading capability for excess current

● at short-circuit during operation 25 ms

Constant overload current

● on short-circuiting during the start-up typical 12 A

Parallel switching for enhanced performance Yes; switchable characteristic

Numbers of parallel switchable units for enhanced

performance

2

Efficiency

Efficiency at Vout rated, Iout rated, approx. 91 %

Power loss at Vout rated, Iout rated, approx. 24 W

Power loss [W] during no-load operation maximum 6 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %),

max.

0.1 %

Dynamic load smoothing (Iout: 50/100/50 %), Uout ±

typ.

3 %

Load step setting time 50 to 100%, typ. 2 ms

Load step setting time 100 to 50%, typ. 2 ms

Setting time maximum 5 ms

Protection and monitoring

Output overvoltage protection < 35 V

Current limitation, typ. 12 A

Property of the output Short-circuit proof Yes

Short-circuit protection Alternatively, constant current characteristic approx. 12 A or

latching shutdown

Enduring short circuit current RMS value

● typical 12 A

Overload/short-circuit indicator LED yellow for "overload", LED red for "latching shutdown"

Safety

Primary/secondary isolation Yes

Galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN

50178

Protection class Class I

Leakage current

● maximum 3.5 mA

● typical 0.32 mA

Degree of protection (EN 60529) IP20

Approvals

CE mark Yes

UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259,

cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)

Explosion protection IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc;

cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2,

Group ABCD, T3

FM approval -

CB approval Yes

Marine approval ABS, DNV GL

Width of the enclosure 70 mm

Height of the enclosure 125 mm

Depth of the enclosure 121 mm

Weight, approx. 0.8 kg