Phoenix Relay Module - PLC-RSC- 24DC/ 1/ACT - 2966210 New & Original with very competitive price and One year Warranty
- Product description
- Contact us
Phoenix Relay Module - PLC-RSC- 24DC/ 1/ACT - 2966210
PLC-INTERFACE for output functions, consisting of PLC-BSC.../ACT basic terminal block with screw connection and plug-in miniature relay with power contact,
for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V DC
Key Commercial Data
Orderkey | 2966210 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 374 (C-5-2019) |
GTIN | 4017918130671 |
Weight per Piece (excluding packing) | 40.000 g |
Custom tariff number | 85364190 |
Country of origin | DE (Germany) |
Dimensions
Width | 6.2 mm |
---|---|
Height | 80 mm |
Depth | 94 mm |
Ambient conditions
Ambient temperature (operation) | -40 °C ... 60 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Degree of protection | IP20 (Relay base) |
Coil side
Nominal input voltage UN | 24 V DC |
---|---|
Typical input current at UN | 9 mA |
Typical response time | 5 ms |
Typical release time | 8 ms |
Protective circuit | Reverse polarity protection Polarity protection diode |
Free-wheeling diode Damping diode | |
Operating voltage display | Yellow LED |
Power dissipation for nominal condition | 0.22 W |
Contact side
Contact type | 1 N/O contact |
---|---|
Type of switch contact | Single contact |
Contact material | AgSnO |
Maximum switching voltage | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
Minimum switching voltage | 5 V (at 100 mA) |
Min. switching current | 10 mA (at 12 V) |
Maximum inrush current | 10 A (4 s) |
Limiting continuous current | 6 A |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
20 W (at 48 V DC) | |
18 W (at 60 V DC) | |
23 W (at 110 V DC) | |
40 W (at 220 V DC) | |
1500 VA (for 250 V AC) | |
Switching capacity | 2 A (at 24 V, DC13) |
0.2 A (at 110 V, DC13) | |
0.1 A (at 220 V, DC13) | |
3 A (at 24 V, AC15) | |
3 A (at 120 V, AC15) | |
3 A (at 230 V, AC15) |
General
Test voltage relay winding/relay contact | 4 kV AC (50 Hz, 1 min.) |
---|---|
Operating mode | 100% operating factor |
Mechanical service life | 2x 107 cycles |
Mounting position | any |
Assembly instructions | In rows with zero spacing |
Connection data
Connection name | Coil side |
---|---|
Connection method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
0.2 mm² ... 2.5 mm² (Single ferrule) | |
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule) | |
Conductor cross section AWG | 26 ... 14 |
Connection data 2
Connection name | Contact side |
---|---|
Connection method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
0.2 mm² ... 2.5 mm² (Single ferrule) | |
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule) | |
Conductor cross section AWG | 26 ... 14 |