Phoenix Signal duplicator - MINI MCR-SL-UI-2I - 2864794 New & Original with very competitive price and One year Warranty
- Product description
- Contact us
Phoenix Signal duplicator - MINI MCR-SL-UI-2I - 2864794
MCR 4-way signal duplicator for the electrical isolation and doubling of analog signals with screw connection,
order configuration. Replacement part: 2905025 MINI MCR-2-UI-2UI-C.
Product Description
The 6.2 mm wide configurable 4-way isolating amplifier MINI MCR-SL-UI-2I-... is used for electrical isolation, conversion,
amplification and filtering of standard signals.
On the input side, the analog standard signals 0...20 mA, 4...20 mA, 0...10 V or 1...5V can be selected,
on the output side there are two current outputs that
can be set independently of one another with a 0...20 mA-, or 4...20mA signal, electrically isolated (4-way isolation).
The DIP switches, which can be accessed on the side of the housing, can be used to configure the input and output signal ranges.
Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in
conjunction with the DIN rail connector.
Key Commercial Data
2864794 |
1 pc |
Page 98 (C-7-2015) |
4017918974978 |
100.000 g |
85437090 |
DE (Germany) |
Dimensions
6.2 mm |
93.1 mm |
102.5 mm |
Ambient conditions
-20 °C ... 60 °C |
-40 °C ... 85 °C |
10 % ... 95 % (non-condensing) |
IP20 |
EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
Power supply
24 V DC |
19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) |
< 30 mA (at 24 V DC incl. load) |
< 600 mW |
Connection data
Screw connection |
12 mm |
M3 |
0.2 mm² ... 2.5 mm² |
0.2 mm² ... 2.5 mm² |
26 ... 12 |