Schneider LTMR08DBD Motor controller LTMR TeSys T - 24 V DC 8 A for DeviceNet New & Original with very competitive price and One year Warranty
New & Original
LTMR08DBD
Please contact us for more information.
- Product description
- Contact us
Schneider LTMR08DBD Motor controller LTMR TeSys T - 24 V DC 8 A for DeviceNet
New & Original with very competitive price and One year Warranty
TeSys T is a smart motor management system. When associated with a short circuit protection device
and a contactor, the device provides full motor monitoring, control and protection for electrical motors.
| range | TeSys | |
|---|---|---|
| product name | TeSys T | |
| device short name | LTMR | |
| product or component type | Motor controller | |
| device application | Equipment monitoring and control | |
| measurement current | 0.4…8 A | |
| [Us] rated supply voltage | 24 V DC | |
| current consumption | 56...127 mA | |
| supply voltage limits | 20.4…26.24 V DC | |
| communication port protocol | DeviceNet | |
| bus type | DeviceNet ISO 1198 interface, addressing 1...64, transmission rate 125...500 kbit/s, terminal block with 4 twisted shielded pairs cable |
| [Ui] rated insulation voltage | 690 V conforming to EN/IEC 60947-1 690 V conforming to CSA C22.2 No 14 690 V conforming to UL 508 | |
|---|---|---|
| [Uimp] rated impulse withstand voltage | 6 kV current or voltage measurement circuit conforming to EN/IEC 60947-4-1 0.8 kV communication circuit conforming to EN/IEC 60947-4-1 0.8 kV supply, inputs and outputs conforming to EN/IEC 60947-4-1 | |
| short-circuit withstand | 100 kA conforming to EN/IEC 60947-4-1 | |
| associated fuse rating | 4 A gG for output 0.5 A gG for control circuit | |
| protection type | Thermal overload protection Overload Power factor variation Reverse polarity protection Earth-leakage protection Thermal protection Overload (long time) Phase failure Load fluctuation Phase unbalance Locked rotor | |
| network and machine diagnosis type | Fault recording Waiting time after overload tripping Remaining operating time before overload tripping Phase fault and earth fault trip counters Starting current and time Trip history information Trip context information Motor control command recording Running hours counter/operating time Event recording | |
| logic input number | 6 | |
| input current | 7 mA | |
| current state 0 guaranteed | Logic input: < 5 V and <= 15 mA for 5 ms | |
| current state 1 guaranteed | Logic input: < 15 V and 2...15 mA for 15 ms | |
| maximum output switching frequency | 2 Hz | |
| load current | 5 A at 250 V AC for logic output 5 A at 30 V DC for logic output | |
| permissible power | 480 VA (AC-15), Ie = 2 A, 500000 cycles (output) 30 W (DC-13), Ie = 1.25 A, 500000 cycles (output) | |
| maximum operating rate | 1800 cyc/h | |
| contacts type and composition | 1 NO + 1 NC fault signal 3 NO | |
| metering type | Phase current I1, I2, I3 RMS Temperature Earth-fault current Average current Iavg Imbalance current | |
| measurement accuracy | 5...15 % earth fault current internal measurement (for current > 0.1 A) 1 % voltage (100...830 V) 3 % power factor (cos φ > 0.6) 5 % earth fault current external measurement (< 5 % or 0.01 A) +/- 30 min/year internal clock 0,02 temperature 1 % current 5 % active and reactive power | |
| overvoltage category | III | |
| connection pitch | 5.08 mm | |
| connections - terminals | Control circuit: connector 1 cable(s) 0.25…2.5 mm² (AWG 24...AWG 14) flexible with cable end Control circuit: connector 1 cable(s) 0.2…2.5 mm² (AWG 24...AWG 14) flexible without cable end Control circuit: connector 1 cable(s) 0.25…2.5 mm² (AWG 24...AWG 14) flexible without cable end Control circuit: connector 1 cable(s) 0.2…2.5 mm² (AWG 24...AWG 14) solid without cable end Control circuit: connector 2 cable(s) 0.2…1 mm² (AWG 24...AWG 14) flexible with cable end Control circuit: connector 2 cable(s) 0.2…1.5 mm² (AWG 24...AWG 14) flexible without cable end Control circuit: connector 2 cable(s) 0.5…1.5 mm² (AWG 24...AWG 14) flexible without cable end Control circuit: connector 2 cable(s) 0.2…1 mm² (AWG 24...AWG 14) solid without cable end | |
| tightening torque | Control circuit: 0.5…0.6 N.m flat screwdriver 3 mm | |
| pollution degree | 3 | |
| electromagnetic compatibility | Electrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 Radiated RF fields, 3, 10 V/m, conforming to EN/IEC 61000-4-3 Fast transients immunity test (other circuits), level 3, 2 kV, conforming to EN/IEC 61000-4-4 Fast transients immunity test (on supply and relay outputs), level 4, 4 kV, conforming to EN/IEC 61000-4-4 Voltage dips and interruptions immunity test, 70 %, 500 ms, conforming to EN/IEC 61000-4-11 Conducted RF disturbances, 10 V, conforming to EN/IEC 61000-4-6 Temperature sensor: surges (serial mode), 0.5 kV, conforming to EN/IEC 61000-4-5 Temperature sensor: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5 Control circuit: surges (serial mode), 1 kV, conforming to EN/IEC 61000-4-5 Control circuit: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5 Communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5 Relay outputs and supply: surges (serial mode), 2 kV, conforming to EN/IEC 61000-4-5 Relay outputs and supply: surges (common mode), 4 kV, conforming to EN/IEC 61000-4-5 | |
| width | 91 mm | |
| height | 61 mm | |
| depth | 122.5 mm | |
| net weight | 0.53 kg | |
| web services | Web server | |
| compatibility code | LTMR |
Related Products
-
Brand New SCHNEIDER analog isolated high level output module BMEAHO0412 Original In Stock
LTMR08DBD Read more -
Brand New SCHNEIDER analog isolated high level input module BMEAHI0812 Original In Stock
LTMR08DBD Read more -
Ready To Ship Original Schneider ATV930D55N4C Variable speed drive, Altivar Process ATV900, ATV930, 55 kW, 400/480 V, w/o braking unit, IP21
LTMR08DBD Read more -
In Stock Original Schneider VW3A3627 Profinet communication module
LTMR08DBD Read more